Heater FAQ's

Q 1. Whats is Drum Heater?

Q 2. What is Band Heaters?

Q 3. Is infra-red heater is good for heating?

Q 4. What to do if the heater cycle on and off regularly?

Q 5. How heater can be changed from natural gas to propane gas?

Q 6. Why Infrared heater is more preferred more than unit heaters?

Q 7. Can you give me some suggestion for selecting heaters?



Q 1. What is Drum Heater?
Ans. Drum heater is that heater which is utilized for pre-heating or heating liquids in pails or drums. This type of heating not only increases the liquid flow but also helps in reducing its viscosity.

Q 2. What is Band Heaters?
Ans. Band heater is that heater that transfer heat through conduction.

Q 3. Is infra-red heater is good for heating?
Ans. Infrared heater is capable of heating objects like floor, machinery, people, etc. It transfer heat through various means like radiation, re-radiation, conduction and convection. As the air passes over the warm concrete the air is heated secondarily.

Q 4. What to do if the heater cycle on and off regularly?
Ans. First turn of the heater, clean your filter and making sure your thermostat is turned all the way up. If the heater is still showing the same problem it is advisable that call the builder or dealer who installed it and arrange for a technician to look at it.

Q 5. How heater can be changed from natural gas to propane gas?
Ans. If you want to change the heater from natural gas to propane then firstly change out the burner tray assembly and the electronic control module. But it is advisable to get ir done by an expert technician.

Q 6. Why Infrared heater is more preferred more than unit heaters?
Ans. Both types that is infrared and forced hot air heating system uses different method to create a comfortable temperature. Infra-red heats the air by using all three methods of heat transfer: radiation, conduction and convection.
In other heating unit, the hot air rises to the ceiling and stratifies. It gradually work its way down to thermostat level hence the the floor slab never becomes warm enough to be comfortable.

Q 7. Can you give me some suggestion for selecting heaters?
Ans. Here are some considerations for purchasing heaters. Voltage required, width, internal dimension, length, thickness of the heater, insulating system etc.